Garage Door Repair Newport News VA can improve its performance, safety, and durability.

Torsion springs offer smoother operation, better balance, and reduced risk of accidents compared to extension springs. In this comprehensive guide, we’ll walk you through the process of converting your garage door to torsion spring.

1. Understand the Difference:

Before you begin, it’s essential to understand the difference between extension springs and torsion springs. Extension springs extend and contract along the horizontal tracks of the garage door, while torsion springs are mounted above the door and unwind to lift it. Torsion springs offer more controlled movement and distribute weight more evenly.

2. Assess Your Garage Door:

Start by assessing your garage door and existing spring system. Check the condition of the door, tracks, cables, and hardware. Look for signs of wear, damage, or imbalance. Note the size and weight of your garage door, as well as the dimensions of the opening.

3. Choose the Right Torsion Springs:

Select torsion springs that are appropriate for your garage door’s size, weight, and track configuration. Measure the diameter and length of your door’s torsion shaft to ensure compatibility with the new springs. Choose springs with the correct wire size and wind direction for your specific application.

4. Gather Necessary Tools and Supplies:

Before you begin the conversion process, gather all the necessary tools and supplies, including:

  • Torsion springs
  • Torsion shaft
  • Spring anchor brackets
  • Center support bracket (if needed)
  • Winding bars
  • Vice grips or locking pliers
  • Adjustable wrench
  • Safety glasses
  • Ladder

5. Remove the Existing Spring System:

Carefully disconnect and remove the existing extension spring system from your garage door. Release tension on the springs using winding bars and vice grips or locking pliers. Follow safety precautions to avoid injury during this step. Once the tension is released, disconnect the springs from the pulleys and brackets.

6. Install the Torsion Spring System:

Mount the torsion springs and torsion shaft above the garage door opening according to manufacturer instructions. Use spring anchor brackets to secure the ends of the springs to the wall or header. Install a center support bracket if needed for additional stability.

7. Wind the Torsion Springs:

Use winding bars to wind the torsion springs to the appropriate tension. Follow the manufacturer’s guidelines for the number of turns needed based on your door’s weight and height. Be cautious and follow proper winding procedures to avoid accidents or injury.

8. Test the Door’s Operation:

Once the torsion springs are properly tensioned, test the operation of the garage door. Open and close the door several times to ensure smooth and balanced movement. Listen for any unusual noises or signs of binding, which may indicate issues with the spring tension or door alignment.

9. Perform Safety Checks:

Inspect all components of the garage door system, including springs, cables, pulleys, tracks, and hardware, for proper alignment and function. Lubricate moving parts as needed and tighten any loose bolts or screws. Ensure that safety features such as sensors and auto-reverse mechanisms are working correctly.

10. Schedule Professional Inspection:

Consider scheduling a professional inspection of your garage door system to ensure that the conversion was completed safely and correctly. A qualified technician can provide additional guidance, perform any necessary adjustments or repairs, and offer recommendations for ongoing maintenance.

Conclusion:

Converting your garage door to torsion spring can enhance its performance, safety, and longevity. By following the steps outlined in this guide and adhering to safety precautions, you can successfully complete the conversion and enjoy smooth and reliable operation of your garage door for years to come. If you’re unsure about performing the conversion yourself, don’t hesitate to seek assistance from a qualified professional to ensure the job is done safely and effectively.

Wallen Garage Door Repair and Installation

732 Bluecrab Rd Ste D, Newport News, VA 23606, United States

1-757-972-7860