Installing a garage door bottom seal can help prevent drafts, debris, and pests from entering your garage.
Here are some steps to follow to install a garage door bottom seal as stated in Garage Door Repair Springtown TX:
- Measure the width of the garage door
Using a measuring tape, measure the width of the garage door. This will help you determine the length of the bottom seal you need to purchase.
- Choose a garage door bottom seal
There are various types of garage door bottom seals available, including rubber, vinyl, and bulb seals. Choose the type that is best suited for your garage door.
- Remove the old bottom seal (if applicable)
If there is an existing bottom seal on your garage door, you will need to remove it before installing the new seal. Use a flat-head screwdriver to remove any screws or staples that are holding the old seal in place. Once the screws and staples are removed, you can pull the old seal off.
- Clean the bottom of the garage door
Before installing the new bottom seal, clean the bottom of the garage door thoroughly. Use a degreaser and a rag to remove any dirt, grime, or debris.
- Cut the new bottom seal to size
Using a pair of scissors or a utility knife, cut the new bottom seal to the length of the garage door.
- Install the new bottom seal
Starting at one end of the garage door, insert the new bottom seal into the track at the bottom of the door. Make sure the seal is aligned correctly, and the flap of the seal is facing inside the garage. Continue pushing the seal into the track, making sure it is snug against the bottom of the door.
- Secure the new bottom seal in place
Once the new bottom seal is in place, secure it using screws or staples. Use a drill or a staple gun to attach the seal to the bottom of the garage door. Make sure the screws or staples are evenly spaced along the seal.
- Test the garage door
Test the garage door by opening and closing it a few times to ensure the new bottom seal is working correctly. Check for any gaps or areas where air or light can still enter the garage. If necessary, make adjustments to ensure a tight seal.
In summary, based from Garage Door Repair Springtown TX, you can install a garage door bottom seal and help prevent drafts, debris, and pests from entering your garage. If you’re not comfortable doing this work yourself, it is recommended to hire a professional garage door technician to help you.
Springtown TX Garage Door
205 Ave A, Springtown, TX 76082
817-373-5963