Winding a Kokomo Overhead & Garage Doors spring is a task that requires careful attention and adherence to safety precautions. Garage door springs, whether torsion springs or extension springs, store a significant amount of tension, which helps balance and support the weight of the door. Winding them correctly is essential for the safe operation of your garage door. Here’s a step-by-step guide on how to wind a torsion garage door spring:

Important Safety Precautions:

  • Safety Glasses: Always wear safety glasses to protect your eyes from any potential debris or spring-related accidents.
  • Gloves: Wear sturdy gloves to protect your hands and provide a better grip while working.
  • Tools: Use the appropriate tools, such as winding bars, that are specifically designed for winding garage door springs.
  • Tension Release: Before winding, ensure that you’ve released the tension from the spring by fully opening the garage door.

Step-by-Step Guide:

1. Identify the Spring Direction:

  • Determine whether your garage door spring is a left-hand wound or right-hand wound spring. This determines the direction you will turn the spring.

2. Secure the Garage Door:

  • Raise the garage door to its full open position and secure it with clamps or vise grips. This prevents the door from accidentally closing while you’re working on the springs.

3. Locate the Winding Cone:

  • The winding cone is the cone-shaped metal piece located at the end of the torsion spring. It is attached to the center shaft.

4. Insert Winding Bars:

  • Insert the appropriate winding bars into the holes on the winding cone. Make sure the winding bars are securely in place.

5. Turn the Winding Cone:

  • If the spring is a left-hand wound spring, turn the winding cone counterclockwise. If it’s a right-hand wound spring, turn the winding cone clockwise. Use a steady and controlled motion to avoid sudden movements.

6. Wind the Spring:

  • Slowly turn the winding cone to wind the spring. As you wind the spring, the tension will increase. Continue winding until you achieve the recommended number of turns for your specific door weight. The number of turns can vary based on the weight and height of your garage door.

7. Test the Tension:

  • Carefully lower the garage door to check its balance. It should remain in place at any point along its travel. If the door doesn’t stay in place or is difficult to lift manually, the spring tension might need further adjustment.

8. Repeat for the Second Spring:

  • If your garage door has two torsion springs, repeat the winding process for the second spring.

9. Final Adjustment:

  • Fine-tune the tension by making small adjustments to achieve a balanced door. This might involve adding or removing a quarter turn from the springs.

10. Inspect and Test:

  • Inspect the entire system to ensure that all components are secure and properly aligned. Test the garage door’s operation to ensure it opens and closes smoothly.

Professional Assistance:

  • If you’re uncomfortable or inexperienced with working on garage door springs, it’s strongly recommended to hire a professional technician. Garage door springs can be extremely dangerous if mishandled, and professional expertise ensures safety and proper functioning.

Conclusion:

Winding a Kokomo Overhead & Garage Doors torsion spring requires precision and adherence to safety precautions. It’s essential to have a good understanding of the spring’s direction, proper tools, and the recommended number of turns for your specific door. If you’re unsure or uncomfortable with the process, it’s best to seek the assistance of a trained garage door professional to ensure safe and effective spring winding.

Kokomo Overhead & Garage Doors

1910 Valerie Ct, Kokomo, IN 46902, United States

1-765-945-2524