Balancing a Garage Door Repair Roanoke TX is an important task that ensures the proper functioning of the door and prevents damage to the door, opener, and other components.
A balanced Garage Door Repair Roanoke TX is one that can be opened and closed smoothly without any resistance. If your garage door is unbalanced, it can be a safety hazard and can cause damage to your door or opener.
- Inspect the Garage Door
The first step in balancing a garage door is to inspect the door for any signs of damage or wear and tear. Check the rollers, tracks, hinges, and springs for any signs of wear and tear. If you notice any signs of damage, you will need to repair or replace the damaged components before attempting to balance the door.
- Release the Automatic Opener
The next step is to release the automatic opener from the door by pulling the emergency release cord. This will allow you to manually open and close the door.
- Lift the Door
Next, lift the door manually and check if it stays in place or if it falls back down. A properly balanced door should stay in place when lifted to the halfway point.
- Adjust the Tension Springs
If the door falls back down, it could be a sign that the tension springs need to be adjusted. The tension springs are located above the door and help counterbalance the weight of the door. Adjusting the tension springs is a job for a professional, as it can be dangerous and requires specialized tools and knowledge.
- Adjust the Extension Springs
If your door has extension springs, which are located on either side of the door, you can adjust the tension yourself. To adjust the tension, you will need to move the hook on the end of the spring to a different hole on the track. Moving the hook towards the door will increase tension, while moving it away from the door will decrease tension. Adjust the tension until the door stays in place when lifted to the halfway point.
- Adjust the Track Alignment
If the door still does not stay in place after adjusting the tension springs, it could be a sign that the tracks are misaligned. To adjust the track alignment, loosen the bolts holding the track to the wall and move the track until it is straight. Tighten the bolts and check the door again to see if it stays in place.
- Check the Rollers
If the door still does not stay in place, check the rollers for signs of damage or wear and tear. Replace any damaged or worn-out rollers with new ones.
- Lubricate Moving Parts
To ensure that the door operates smoothly, lubricate all moving parts, including the rollers, tracks, and hinges, with a high-quality garage door lubricant.
- Test the Door
After making any adjustments, test the door again to see if it is properly balanced. If the door stays in place when lifted to the halfway point, it is properly balanced.
- Adjust the Automatic Opener
Finally, if the door is properly balanced, you can re-engage the automatic opener by pulling the emergency release cord and then pushing the button on the opener. If the door does not open or close smoothly, adjust the automatic opener’s force and limit settings until it operates correctly.
In conclusion, balancing a garage door is an important task that ensures the proper functioning of the door and prevents damage to the door and opener. By following these steps, you can balance your garage door and ensure that it operates smoothly and safely. If you are unsure about any of the steps or do not have the necessary tools and knowledge, it is best to call a professional garage door technician to help you with the job.
South Denton Overhead Garage Door
112 US-377 #9, Roanoke, TX 76262, United States
1-817-873-2942