To program a Chamberlain garage door keypad, follow these steps from Garage Door Alpharetta GA:

  1. Locate the Learn Button on the Garage Door Opener:
    • Start by locating the Learn Button on the back or side panel of your Chamberlain garage door opener motor unit.
    • Take a moment to find it, as it will be an essential part of the programming process.
  2. Clear Existing Codes (If Necessary):
    • If you’re setting up the keypad for the first time or want to reset it, it’s best to clear any existing codes.
    • Press and hold the Learn Button on the garage door opener until the indicator light turns off. This action erases any previously programmed codes.
  3. Enter Programming Mode:
    • Once the codes are cleared, it’s time to enter programming mode on the garage door opener.
    • Press and release the Learn Button. The indicator light should illuminate or blink, indicating that the opener is ready to receive new codes.
  4. Program the Keypad:
    • Now, it’s time to program the keypad with your desired PIN (personal identification number).
    • Enter your chosen PIN using the numeric keys on the keypad. Select a sequence that is easy for you to remember but not easily guessed by others.
    • Press and hold the Enter or Learn button on the keypad until the indicator light blinks or goes out. This action sends the PIN to the garage door opener, programming it successfully.
  5. Test the Keypad:
    • Stand within range of the garage door opener and enter the newly programmed PIN on the keypad.
    • The garage door should respond by either opening or closing, depending on its current position.
    • If the door doesn’t respond, double-check the PIN and make sure you followed the programming steps correctly.
  6. Program Additional PINs (If Needed):
    • If you want to provide access to other family members or temporary users, you can program additional PINs on the keypad.
    • Repeat the previous steps, selecting a different PIN for each user. This way, each person can have their unique code for convenient entry.
  7. Mount the Keypad (If Not Already Mounted):
    • If you haven’t already done so, securely mount the keypad in a suitable location near the garage door.
    • Common places include the outside wall or the jamb next to the entrance.
    • Make sure it is mounted at a convenient height and that the buttons are easily accessible.
  8. Note the Battery Replacement Requirements:
    • Finally, take note of the keypad’s battery type and the process for replacing it.
    • Keep track of the battery’s life and replace it promptly when needed to ensure proper functionality of the keypad.

Remember, these steps serve as a general guide for programming a Chamberlain garage door keypad. For specific instructions and any variations based on your particular model, consult the instruction manual provided with your Chamberlain garage door opener.

By following these steps from Garage Door Alpharetta GA, you’ll be able to program your Chamberlain garage door keypad successfully. Enjoy the convenience and security of keyless entry to your garage!

Southern Home Garage Door Alpharetta

5955 Shiloh Rd E, Alpharetta, GA 30005, United States

678-562-7963