Programming a Genie Garage Door Repair opener requires several steps. Before starting, it is essential to read and understand the instructions provided by the manufacturer.

Follow these steps to program your Genie garage door opener:

  1. Prepare the Remote Control: The first step is to prepare the remote control that will operate the garage door opener. Genie provides various types of remote controls, including the traditional remote, the wireless keypad, and the Smart Button. The remote control should be programmed before proceeding to the next steps.
  2. Locate the Learn Button: The next step is to locate the Learn Button on the garage door opener motor unit. The Learn Button is a small black button located on the motor unit. It may be on the back or side of the unit.
  3. Press the Learn Button: Once you have located the Learn Button, press and release it. The LED light on the motor unit will flash. This indicates that the garage door opener is in programming mode.
  4. Program the Remote Control: Press the button on the remote control that you want to use to operate the garage door. Hold down the button until the LED light on the motor unit stops flashing. This indicates that the garage door opener has learned the code.
  5. Test the Remote Control: To ensure that the programming was successful, test the remote control by pressing the button that you just programmed. The garage door should open or close, depending on the button’s function.
  6. Repeat the Process: If you have multiple remote controls that you want to program, repeat the above steps for each remote control.
  7. Program the Wireless Keypad: To program the wireless keypad, locate the Learn Button on the motor unit, as in Step 2. Enter the PIN code that you want to use on the wireless keypad. Then, press and hold the # button on the wireless keypad until the LED light on the motor unit stops flashing.
  8. Test the Wireless Keypad: Test the wireless keypad by entering the PIN code and pressing the # button. The garage door should open or close, depending on the button’s function.
  9. Program the Smart Button: The Smart Button allows you to control the garage door opener from inside your home. To program the Smart Button, locate the Learn Button on the motor unit, as in Step 2. Press and release the Learn Button. Then, press and hold the Smart Button until the LED light on the motor unit stops flashing.
  10. Test the Smart Button: Test the Smart Button by pressing it. The garage door should open or close, depending on the button’s function.

In conclusion, programming a Genie Garage Door Repair opener is a simple process. By following the steps provided by the manufacturer, you can program your remote control, wireless keypad, and Smart Button to operate the garage door opener.

Dragon Garage Door & Gates

351 Central Ave #7, Southlake, TX 76092, United States

1-817-587-0445