Proper lubrication is essential for ensuring smooth operation and extending the lifespan of your Garage Door Repair system.

Over time, the moving parts can become dry and start to wear down, leading to noisy operation, sticking, and potentially even damage. By lubricating your garage door regularly, you can help prevent these issues and keep everything running smoothly.

Before you begin, it’s important to gather the necessary materials. You’ll need a garage door lubricant specifically designed for this purpose. While you can use lightweight household oils in a pinch, they may not provide adequate lubrication or could potentially damage the garage door components over time. It’s best to use a lubricant made explicitly for garage doors, which you can find at most hardware stores or online.

Additionally, you’ll need a clean rag or paper towels to wipe away any excess lubricant and a stepladder or sturdy stool to reach the top portions of the door and track.

Once you have your materials ready, follow these steps to lubricate your garage door properly:

  1. Start by opening the garage door fully. This will give you access to all the moving parts that require lubrication.
  2. Begin with the hinges that connect the individual panels of the garage door. Apply a small amount of lubricant to each hinge, working your way down from the top panel to the bottom. Be sure to lubricate both sides of each hinge for complete coverage.
  3. Next, move on to the roller tracks on both sides of the door. These are the horizontal tracks that the rollers attached to the door panels slide along. Spray or apply a thin line of lubricant along the entire length of each track, focusing on the areas where the rollers make contact.
  4. The rollers themselves also require lubrication. Carefully lift the garage door slightly and apply a small amount of lubricant to each roller, rotating it to ensure complete coverage.
  5. If your garage door has a torsion spring (the large spring mounted horizontally above the door opening), it’s essential to lubricate this component as well. Apply a thin coating of lubricant to the entire length of the spring, being careful not to get any on the cable drums or other nearby components.
  6. For doors with extension springs (the stretched springs on either side of the door), apply lubricant to the springs and any pulleys or hardware they interact with.
  7. Moving to the opener mechanism, locate the opener’s rail and apply lubricant along its entire length. This will help ensure smooth operation of the trolley that rides along the rail.
  8. If your opener has a chain or belt drive system, lubricate the length of the chain or belt with a thin coating of lubricant, taking care not to get any on the nearby sprocket or pulley.
  9. Finally, check the owner’s manual for your specific garage door opener model and follow any additional lubrication recommendations from the manufacturer.

Once you’ve completed lubricating all the necessary components, take a clean rag and wipe away any excess lubricant that may have dripped or spilled onto other parts of the door or opening mechanism. This will help prevent dirt and debris from sticking to those areas.

It’s generally recommended to lubricate your Garage Door Repair every six months to a year, depending on usage and environmental conditions. By taking the time to properly lubricate all the moving parts, you’ll not only ensure smooth, quiet operation but also extend the lifespan of your garage door system, saving you money on potential repairs or replacements down the line.

Atlas Door Company

6817 Sundance Cir W, Joshua, TX 76058, United States

1-817-295-3660